Microfluidic Accessories

Tubing

CorSolutions offers a wide variety of tubing including:
1/16-inch FEP Tubing
Example of 1/16-inch FEP tubing.
1/32-inch PEEK Tubing
Example of 1/32-inch PEEK tubing.


Tubing Cutters

Polymer Tubing Cutter
Polymer Tubing Cutter
Hard Polymer Tubing Cutter
Hard Polymer Tubing Cutter
Fused Silica Capillary Cutter
Fused-silica capillary cutter


End Attachments for Connectors

A wide variety of end attachments for the fluidic connectors are available.
End Attachment for 1/16-inch Tubing
For 1/16-inch tubing
End Attachment for 1/32-inch Tubing
For 1/32-inch tubing
End Attachment for Capillary Tubing
For capillary tubing
End Attachment for Longer Reach
For longer reach
End Attachment for 10-32 threads
For 10-32 threads
End Attachment for Large Fittings
For large fittings
End Attachment with Electrical Probe
Electrical probe
End Attachment for PDMS
PDMS pierce and seal
More information on connectors


Gaskets

Gaskets for the fluidic connectors are available in a variety of different sizes. Additionally CorSolutions can make custom gaskets. Please contact us for further information.
Gaskets for Microfluidic Connectors
Gaskets (in red) for 1/32-inch and 1/16-inch tubing.


Voltage Application Clamp

This clamp attaches to a fluidic probe, allowing for an electrical potential to be applied to a fluid stream. An example of use includes the ability to provide a voltage to a fluid stream either pre- or post-device, thus avoiding the need to fabricate an on-chip electrode. This approach is compatible with a wide variety of electrode materials. Contact us for fitting types needed for your application.


Slide Press

This press is used to position and compress slides in place while bonding or adhering layers.


Holders and Chucks

CorSolutions offers a unique microdevice holder, composed of nesting inserts. These inserts allow the single holder to accept a 6 inch, 4 inch or microscope slide device. The holder allows devices to be secured and positioned for a variety of purposes. Examples include mounting in microscopes, boom stands, or tables. As devices are supported on their edges, the holder can be used for transmitted light applications. It also can serve as a secure holding means for manual operations, such as addition of ports or bonding. The holder has clearance holes, allowing for it to be mounted to peripherals, and it has removable feet.


Capillaries with Embedded Filters


Imaging and Software
Capillaries with embedded filters can be used with CorSolutions’ fluidic probes. When placed at the outlet end of a microdevice, the embedded filter serves as a frit, allowing particles as small as 2 microns to be retained and packed into the device. When placed at the inlet end of a microdevice, it serves as a filter to keep unwanted particulate from entering the microdevice.
Capillary Embedded with Filter
An empty capillary (left) and one with an embedded filter (right).
CorSolutions offers metrology software for such measurements as time lapse imaging, channel dimension determination, edge detection, particle velocities, image stitching and spline determination.